Speak to a Specialist
Speak to a Specialist
Wallington · SM6

Structural Drying & Dehumidifier Hire in Wallington

Fast, monitored structural drying across Wallington after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

Call 020 3051 8478Arrange drying
★★★★★ 4.9 from 19 Google reviews · trusted by Wallington homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Wallington, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.
On this page

Leak to dry to treated, one company in Wallington

Wallington's housing is largely 1930s bay-fronted semis and terraces around Woodcote and Manor Road, with older Victorian terraces near the town centre and post-war housing on the Roundshaw estate. This spread of suspended timber floors, solid brick walls and later concrete extensions means a leak behaves differently from house to house, making standard drying assumptions unreliable.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Wallington we cover

We dry properties right across Wallington and its neighbourhoods, including:

Drying challenges in Wallington homes

Suspended timber floors in the 1930s semis

Many Wallington semis off Woodcote Road and Manor Road sit on suspended timber ground floors with a shallow void beneath. A burst pipe or washing machine leak can send water straight through the boards into the joists and sub-floor void, where it sits unseen against brick sleeper walls. Left unchecked, this leads to swollen boards, fungal growth on joists and persistent damp smells long after the surface floor looks dry.

Solid brick walls and bay window returns

The bay-fronted 1930s houses common across Wallington were built with solid or early cavity brick walls, particularly around the bay window returns and party walls. Water tracking down from a roof leak or overflow gets trapped in the masonry and plaster, drying very slowly compared with modern insulated walls. Surface plaster can appear dry within days while the brickwork behind stays saturated, risking blown plaster and mould if drying is stopped too early.

Concrete screed floors on the Roundshaw estate

Post-war housing on the Roundshaw estate, built on the old Croydon Airport site, and many kitchen and rear extensions across Wallington use solid concrete floors finished with a sand and cement screed. These floors absorb and hold water from leaks far longer than timber, with moisture moving laterally under skirtings and vinyl or laminate coverings. Screed can read dry at the surface for weeks while dampness persists lower down, encouraging mould behind fitted units.

What our customers say

★★★★★

I have been dealing with damp and mould for years but these guys were able to come in and resolve the problem quickly and professionally. Their prices were fair and reasonable and they got the job done clean. 10/10 would use again and would recommend.

Thersa Waron Eurmind, via Google

★★★★★

Very helpful and professional, easy to communicate with about my mould issues and I received fast responses from the company on the best solutions for me. would recommend to all friends and family. 5/5

Jensen B, via Google

★★★★★

I recently used a damp and mould specialist company and was extremely impressed with the service from start to finish. From the initial survey, they were knowledgeable, thorough, and took the time to clearly explain the cause of the issue rather than just treating the symptoms.

Tarik Barak, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Wallington?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Wallington.

Frequently asked questions

How long does structural drying take in Wallington?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.

More help in Wallington

Damp and mould survey

Find the real cause of damp, mould or a leak in a Wallington property, with a written report and photographs. Damp survey in Wallington →

Leak detection

Trace a hidden water leak in Wallington using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Wallington →

Mould removal

Treat black mould in a Wallington property and fix the moisture source behind it. Mould removal in Wallington →