Speak to a Specialist
Speak to a Specialist
Southwark · SE1, SE5, SE15, SE16, SE17

Structural Drying & Dehumidifier Hire in Southwark

Fast, monitored structural drying across Southwark after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

Call 020 3051 8478Arrange drying
★★★★★ 4.9 from 19 Google reviews · trusted by Southwark homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Southwark, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.
On this page

Leak to dry to treated, one company in Southwark

Southwark's stock spans Georgian terraces in Borough, Victorian brick housing in Camberwell and Peckham, riverside warehouse conversions in Bermondsey and Rotherhithe, and large post-war council estates around Walworth and Elephant and Castle. Solid brick walls, converted timber warehouse floors and a high water table near the Thames all slow drying and let moisture linger unseen.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Southwark we cover

We dry properties right across Southwark and its neighbourhoods, including:

Drying challenges in Southwark homes

Solid brick Victorian terraces with no cavity

Much of Camberwell, Peckham and East Dulwich is Victorian solid-wall construction with no cavity to interrupt moisture. Once water penetrates from a leak or roof failure, it travels through the brick and lime plaster, spreading sideways into adjoining rooms and party walls, so drying has to be managed room by room rather than at a single visible patch.

Converted warehouse floors in Bermondsey and Rotherhithe

Riverside warehouse conversions around Bermondsey and Rotherhithe often combine original timber joists with later concrete screed toppings. Water becomes trapped between these layers and beneath dense floor finishes, so surface readings can appear dry while the subfloor stays saturated for weeks, risking timber decay if drying isn't verified with proper monitoring.

Post-war council estates and basement flats

Large estates around Walworth and Elephant and Castle, alongside basement and lower-ground flats near the Thames, sit close to a high water table and use concrete floor slabs that hold moisture in voids and screed. Combined with limited ventilation in flats, this creates ideal conditions for mould to establish behind skirting and plasterboard within days.

What our customers say

★★★★★

Really impressed with the whole experience. The surveyor did a proper, thorough job and didn't rush anything, they got to the root cause of the damp and explained it all clearly. Detailed, professional and reassuring from start to finish. Couldn't recommend them more highly.

Keiryn Raf, via Google

★★★★★

Very professional and organised I must say came out and completed the work very efficiently customer service was excellent. Definitely recommend this damp and mould service to anyone looking for a job done correctly. :)

Joeie Rouse, via Google

★★★★★

I have been dealing with damp and mould for years but these guys were able to come in and resolve the problem quickly and professionally. Their prices were fair and reasonable and they got the job done clean. 10/10 would use again and would recommend.

Thersa Waron Eurmind, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Southwark?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Southwark.

Frequently asked questions

How long does structural drying take in Southwark?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.

More help in Southwark

Leak detection

Trace a hidden water leak in Southwark using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Southwark →

Mould removal

Treat black mould in a Southwark property and fix the moisture source behind it. Mould removal in Southwark →