Speak to a Specialist
Speak to a Specialist
Primrose Hill · NW1, NW3

Structural Drying & Dehumidifier Hire in Primrose Hill

Fast, monitored structural drying across Primrose Hill after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 4.9 from 19 Google reviews · trusted by Primrose Hill homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Primrose Hill, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.

Leak to dry to treated, one company in Primrose Hill

Primrose Hill's stucco-fronted Victorian terraces and grand townhouses, many now split into garden and lower-ground flats, sit on solid brick walls with lime plaster rather than modern cavity construction. This traditional fabric, common across the conservation area, draws moisture upward and sideways after a leak, while period timber floors and skirting trap dampness far longer than newer builds allow for.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Primrose Hill we cover

We dry properties right across Primrose Hill and its neighbourhoods, including:

Drying challenges in Primrose Hill homes

Lime Plaster and Solid Walls Holding Onto Moisture

Many Primrose Hill homes retain original lime plaster on solid brick walls, a breathable material that behaves very differently from modern gypsum board when saturated. It can look dry on the surface while still holding significant moisture beneath, so we monitor with meters over time rather than judging by touch, avoiding premature redecoration that traps damp behind new finishes and invites mould.

Lower Ground and Garden Flat Conversions

The conversion of Victorian townhouses into lower-ground and garden flats, common throughout the area, has left many properties with floors close to or below external ground level. Screed and subfloor voids here are slower to dry due to limited natural ventilation and proximity to damp earth, so we position air movers and dehumidifiers to target these below-grade spaces specifically.

Timber Suspended Floors in Period Terraces

Original suspended timber floors and joists sit beneath many Primrose Hill terraces, with underfloor voids that can hold water long after a visible leak stops. Poor sub-floor airflow in these older builds means trapped moisture encourages rot and mould growth unobserved. We check voids directly and ventilate them properly, rather than relying on surface drying alone to resolve the underlying dampness.

What our customers say

★★★★★

Clearly communication, easy to deal with and responsive. We would thoroughly recommend. The report was really detailed making our buying negotiations a lot stronger and leaving us with a clear plan of action with possible timeframes.

Ramani Young, via Google

★★★★★

Was lovely working with the team and they did a fantastic and quick job to get all the mould out of my bathroom. Very much looking forward to working with them on other projects around my house!! Thank you for everything and shout out to Karim for being so sweet!

Mariama, via Google

★★★★★

Omg what brilliant service, excellent the cleaner did a very good job was efficient he took his time and cleaned everything, highly recommend S. Bessim…

Susan Bessim, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Primrose Hill?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Primrose Hill.

Frequently asked questions

How long does structural drying take in Primrose Hill?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.

More help in Primrose Hill

Damp and mould survey

Find the real cause of damp, mould or a leak in a Primrose Hill property, with a written report and photographs. Damp survey in Primrose Hill →

Leak detection

Trace a hidden water leak in Primrose Hill using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Primrose Hill →

Mould removal

Treat black mould in a Primrose Hill property and fix the moisture source behind it. Mould removal in Primrose Hill →