Speak to a Specialist
Speak to a Specialist
Poplar · E14

Structural Drying & Dehumidifier Hire in Poplar

Fast, monitored structural drying across Poplar after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 4.9 from 19 Google reviews · trusted by Poplar homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Poplar, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.

Leak to dry to treated, one company in Poplar

Poplar's housing runs from the Lansbury Estate's post-war low-rise blocks and Victorian terraces near Chrisp Street to concrete high-rises and glass-fronted riverside developments around Canary Wharf and East India. This range of ages and construction methods means a burst pipe or flood behaves very differently from block to block, and drying strategies that work in one building can fail entirely in a neighbouring one.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Poplar we cover

We dry properties right across Poplar and its neighbourhoods, including:

Drying challenges in Poplar homes

Concrete-framed estate blocks holding moisture

Many of Poplar's estate blocks, including parts of the Lansbury Estate, use concrete floor slabs and solid concrete walls. These structures are dense and slow to release water once saturated, so a leak from a flat above can leave moisture trapped for weeks. Surface readings can look dry while damp persists deep in the slab, risking mould in skirting and plasterboard linings fixed directly to the concrete.

Solid brick Victorian terraces near Chrisp Street and Bow border

Older terraced housing on Poplar's western edges typically has solid brick walls and lime or early cement plaster with no cavity to interrupt moisture. Water from a leaking roof or overflowing bath spreads sideways through the brickwork and lath and plaster ceilings, meaning damage often shows up in a downstairs room far from where the leak started, complicating both diagnosis and effective drying.

Riverside flats and high-rise voids around Canary Wharf

Newer apartment blocks near the Wharf and East India often have engineered timber floors over screed, service risers, and sealed voids for cabling and insulation. Leaks can run into these voids unnoticed, and airtight modern construction that normally aids energy efficiency also traps humidity once saturated, slowing natural evaporation and raising the risk of hidden mould behind kitchen units and bathroom walls.

What our customers say

★★★★★

Was lovely working with the team and they did a fantastic and quick job to get all the mould out of my bathroom. Very much looking forward to working with them on other projects around my house!! Thank you for everything and shout out to Karim for being so sweet!

Mariama, via Google

★★★★★

Omg what brilliant service, excellent the cleaner did a very good job was efficient he took his time and cleaned everything, highly recommend S. Bessim…

Susan Bessim, via Google

★★★★★

Amazing company! They responding very quickly. They have a low prices as well, not crazy quotes like from others. Job has been done very quickly and team was very professional. I will use them in the future if I needed. Thanks!

Patryk Gutowski, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Poplar?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Poplar.

Frequently asked questions

How long does structural drying take in Poplar?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.

More help in Poplar

Damp and mould survey

Find the real cause of damp, mould or a leak in a Poplar property, with a written report and photographs. Damp survey in Poplar →

Leak detection

Trace a hidden water leak in Poplar using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Poplar →

Mould removal

Treat black mould in a Poplar property and fix the moisture source behind it. Mould removal in Poplar →