Speak to a Specialist
Speak to a Specialist
Moorgate · EC2Y, EC2M, EC1Y

Structural Drying & Dehumidifier Hire in Moorgate

Fast, monitored structural drying across Moorgate after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

Call 020 3051 8478Arrange drying
★★★★★ 4.9 from 19 Google reviews · trusted by Moorgate homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Moorgate, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.
On this page

Leak to dry to treated, one company in Moorgate

Moorgate's residential stock is a mix of the Barbican's concrete-framed towers and terrace blocks, Victorian mansion flats around Finsbury, and office buildings converted to apartments under permitted development. Concrete slabs hold moisture for weeks, mansion block lath-and-plaster walls draw water sideways, and conversions often hide thin partitions and services that were never designed to get wet.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Moorgate we cover

We dry properties right across Moorgate and its neighbourhoods, including:

Drying challenges in Moorgate homes

Concrete floors and walls in the Barbican and nearby towers

The exposed concrete construction common around the Barbican and other 1960s and 1970s blocks near Moorgate is dense and slow to release water once a pipe or roof leak gets in. Moisture can sit within the slab and screed for a long period, reading damp on the surface long after a visible leak has stopped, so drying needs sustained dehumidification rather than a quick surface dry.

Lath-and-plaster walls in Finsbury's mansion blocks

Period mansion blocks around Finsbury and City Road often retain original lath-and-plaster internal walls and suspended timber floors. A leak from an upstairs flat or a communal riser can travel between joists and behind plaster, wetting timber lath that swells and holds moisture. Left untreated this leads to blown plaster, sagging ceilings and mould growth within wall voids that are awkward to access and ventilate.

Office-to-residential conversions with hidden voids

A number of former commercial buildings near Moorgate and London Wall have been converted into flats, often with stud partitions, raised floors and service risers built around the original structure. These voids can trap water from a leak for weeks, feeding mould growth behind plasterboard that looks dry on the surface, which means conversions typically need void inspection and targeted drying rather than surface treatment alone.

What our customers say

★★★★★

I recently used a damp and mould specialist company and was extremely impressed with the service from start to finish. From the initial survey, they were knowledgeable, thorough, and took the time to clearly explain the cause of the issue rather than just treating the symptoms.

Tarik Barak, via Google

★★★★★

Was lovely working with the team and they did a fantastic and quick job to get all the mould out of my bathroom. Very much looking forward to working with them on other projects around my house!! Thank you for everything and shout out to Karim for being so sweet!

Mariama, via Google

★★★★★

Omg what brilliant service, excellent the cleaner did a very good job was efficient he took his time and cleaned everything, highly recommend S. Bessim…

Susan Bessim, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Moorgate?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Moorgate.

Frequently asked questions

How long does structural drying take in Moorgate?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.

More help in Moorgate

Damp and mould survey

Find the real cause of damp, mould or a leak in a Moorgate property, with a written report and photographs. Damp survey in Moorgate →

Leak detection

Trace a hidden water leak in Moorgate using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Moorgate →

Mould removal

Treat black mould in a Moorgate property and fix the moisture source behind it. Mould removal in Moorgate →