Speak to a Specialist
Speak to a Specialist
Kensington · W8, W10, W11, W14, SW5, SW7

Structural Drying & Dehumidifier Hire in Kensington

Fast, monitored structural drying across Kensington after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 5.0 from 22 Google reviews
Quick answer: Damp & Mould Solutions UK carries out structural drying and dehumidifier hire in Kensington after a leak or flood, measuring moisture until the structure is genuinely dry, not just dry to the touch. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. Drying equipment is hired by the week, with a one week minimum. Call 020 3051 8478.

Damp, mould & leak services in Kensington

Kensington's housing stock is dominated by grand stucco-fronted Victorian and Edwardian terraces, garden square mansion blocks, mews houses and increasingly deep basement conversions. Solid brick construction, lime plaster and original lath ceilings hold moisture far longer than modern cavity walls, while listed facades and conservation area rules restrict the drying methods and materials that can be used on site.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp, Mould and Water Damage Assessment

One visit that tells rising damp, penetrating damp and condensation apart and finds what is feeding any mould, so the right repair is done once. About the Assessment →

Areas of Kensington we cover

We dry properties right across Kensington and its neighbourhoods, including:

Drying challenges in Kensington homes

Solid brick walls and lime plaster in period terraces

Many Kensington terraces have solid nine-inch brick walls finished internally with lime or lath-and-plaster rather than modern gypsum board. These materials absorb water deeply and release it slowly, so a burst pipe or roof leak can leave walls damp for weeks. Listed building status often rules out cutting plaster back or fitting vapour barriers, so drying has to be managed carefully with dehumidification and monitored moisture readings instead.

Basement conversions and lightwell flats

The borough's popular basement and lower-ground-floor conversions sit below street level, often with lightwells and tanked walls that trap water once it gets in. Screed floors laid over underfloor heating or insulation saturate easily and dry slowly because the tanking that keeps groundwater out also stops trapped moisture escaping, meaning subfloors need active extraction rather than just ventilation.

Leaks travelling through mansion block risers and ceilings

Kensington's mansion blocks around South Kensington and Earls Court share plumbing risers and structural floors between flats, so a leak in one property frequently saturates the ceiling and screed of the flat below. Original lath-and-plaster ceilings can hold significant weight of water before showing signs, increasing the risk of collapse and making early moisture detection and coordinated drying across neighbouring flats essential.

What our customers say

Excellent
Rated 5.0 / 5 based on 22 reviews on
Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Kensington?

Call 020 3051 8478 or send us your details and we will agree a date with you. We dry and treat for homeowners, landlords and managing agents across Kensington.

Frequently asked questions

How much does structural drying in Kensington cost?
Drying equipment is hired by the week, with a one week minimum. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. Managed drying suits insurance claims and jobs where repair work depends on the property being proven dry.
How long does structural drying take in Kensington?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the week with a one week minimum, for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.

More help in Kensington

Damp, Mould and Water Damage Assessment

Find the real cause of damp, mould or a leak at your Kensington property, with a written report and photographs. Assessment in Kensington →

Leak detection

Trace a hidden water leak in Kensington using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Kensington →

Mould removal

Treat black mould in your Kensington property and fix the moisture source behind it. Mould removal in Kensington →

See what you get before you speak to us: read a real report from start to finish.