Speak to a Specialist
Speak to a Specialist
Kensington and Chelsea · W8, W10, W11, SW3, SW5, SW7, SW10

Structural Drying & Dehumidifier Hire in Kensington and Chelsea

Fast, monitored structural drying across Kensington and Chelsea after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 5.0 from 20 Google reviews · trusted by Kensington and Chelsea homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Kensington and Chelsea, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.

Leak to dry to treated, one company in Kensington and Chelsea

Kensington and Chelsea mixes grand stucco-fronted Victorian terraces, converted mansion blocks and dug-out basement flats with pockets of post-war and social housing further north. Lime and lath-and-plaster walls, suspended timber floors, garden square basements and shared service risers all behave differently once wet, making thorough, monitored drying essential rather than optional after any leak or flood.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Kensington and Chelsea we cover

We dry properties right across Kensington and Chelsea and its neighbourhoods, including:

Drying challenges in Kensington and Chelsea homes

Basement and lower ground floor conversions

Many Chelsea and South Kensington terraces have been dug out into lower ground floor bedrooms, kitchens and utility rooms, often below the water table with tanking and sump systems. A pipe failure or surface water ingress here sits below external ground level, so moisture is slow to disperse. Saturated screed and stud walls in these rooms need mechanical dehumidification and careful monitoring, not just surface mopping, to prevent trapped damp and mould developing behind finishes.

Lime plaster and lath walls in period terraces

The borough's Victorian and Edwardian stock, particularly around Holland Park and Notting Hill, still retains original lath-and-lime plaster rather than modern gypsum. Lime plaster absorbs and releases moisture more slowly and can crack or blow if dried too aggressively with high heat. Getting this wrong either leaves damp trapped against timber laths, encouraging mould, or damages historic finishes, so drying has to be gradual and properly measured.

Mansion blocks and shared floor voids

Purpose-built mansion blocks around Earl's Court and Kensington have suspended timber floors, party walls and shared service risers connecting multiple flats. A leak in one flat can carry moisture into a neighbour's ceiling void or floor structure, where it is hidden from view and slow to evaporate. Coordinating access and drying across affected units is often necessary to stop hidden pockets of moisture leading to secondary mould weeks after the original leak.

What our customers say

Excellent
Rated 5.0 / 5 based on 20 reviews on
Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Kensington and Chelsea?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Kensington and Chelsea.

Frequently asked questions

How long does structural drying take in Kensington and Chelsea?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.

More help in Kensington and Chelsea

Damp and mould survey

Find the real cause of damp, mould or a leak in a Kensington and Chelsea property, with a written report and photographs. Damp survey in Kensington and Chelsea →

Leak detection

Trace a hidden water leak in Kensington and Chelsea using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Kensington and Chelsea →

Mould removal

Treat black mould in a Kensington and Chelsea property and fix the moisture source behind it. Mould removal in Kensington and Chelsea →