Speak to a Specialist
Speak to a Specialist
Hayes · UB3, UB4

Structural Drying & Dehumidifier Hire in Hayes

Fast, monitored structural drying across Hayes after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 4.9 from 17 Google reviews · trusted by Hayes homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Hayes, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.

Leak to dry to treated, one company in Hayes

Hayes mixes 1930s semis and bay-fronted terraces around Hayes End and Wood End Green with ex-council low-rise estates in Botwell and Yeading, plus new canal-side apartment blocks at Grand Union Village and the Old Vinyl Factory. Solid concrete floors, rendered solid-brick walls and proximity to the Grand Union Canal and Yeading Brook all slow drying and raise flood exposure across the area.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Hayes we cover

We dry properties right across Hayes and its neighbourhoods, including:

Drying challenges in Hayes homes

Solid concrete floors in Hayes End and Wood End Green semis

Many 1930s semis and terraces here were built with solid concrete ground floors rather than suspended timber. Once water gets under vinyl, laminate or tiles, the screed beneath can hold moisture for weeks. Surface readings look dry long before the slab core is, so we use deep moisture meters and targeted extraction to confirm the floor has actually released its moisture before flooring goes back down.

Canal-side new-builds around Grand Union Village and the Old Vinyl Factory

Flats near the canal and the redeveloped Old Vinyl Factory site sit on dense concrete slabs with insulated stud partitions and vapour barriers designed to keep moisture out, not let it escape once it gets in. A leak or canal-adjacent flooding can trap water behind plasterboard and insulation, where it stays hidden and feeds mould unless walls are opened up or dried with targeted air movement and dehumidification.

Rendered solid-wall estates in Botwell and Yeading

The ex-council low-rise estates around Botwell and Yeading are largely solid brick under painted render, often with lath and plaster internally. Water tracking behind cracked or poorly sealed render can travel sideways through the wall before showing indoors, saturating plaster and skirting voids. These solid walls dry far slower than cavity construction, so we monitor readings over several days rather than assuming a quick surface dry means the wall is sound.

What our customers say

★★★★★

Very professional and organised I must say came out and completed the work very efficiently customer service was excellent. Definitely recommend this damp and mould service to anyone looking for a job done correctly. :)

Joeie Rouse, via Google

★★★★★

I have been dealing with damp and mould for years but these guys were able to come in and resolve the problem quickly and professionally. Their prices were fair and reasonable and they got the job done clean. 10/10 would use again and would recommend.

Thersa Waron Eurmind, via Google

★★★★★

Very helpful and professional, easy to communicate with about my mould issues and I received fast responses from the company on the best solutions for me. would recommend to all friends and family. 5/5

Jensen B, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Hayes?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Hayes.

Frequently asked questions

How long does structural drying take in Hayes?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.