Speak to a Specialist
Speak to a Specialist
Gillingham · ME7, ME8

Structural Drying & Dehumidifier Hire in Gillingham

Fast, monitored structural drying across Gillingham after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 5.0 from 22 Google reviews
Quick answer: Damp & Mould Solutions UK carries out structural drying and dehumidifier hire in Gillingham after a leak or flood, measuring moisture until the structure is genuinely dry, not just dry to the touch. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. Drying equipment is hired by the week, with a one week minimum. Call 020 3051 8478.

Damp, mould & leak services in Gillingham

Gillingham's housing runs from Victorian terraces around the old Dockyard and Brompton, through 1930s bay-fronted semis, to postwar council-built estates in Twydall and Hempstead and denser flat conversions nearer the town centre. This mix of solid brick, cavity block and timber suspended floors means leaks behave differently street to street, and older lime-plastered walls hold water for far longer than modern plasterboard.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp, Mould and Water Damage Assessment

One visit that tells rising damp, penetrating damp and condensation apart and finds what is feeding any mould, so the right repair is done once. About the Assessment →

Areas of Gillingham we cover

We dry properties right across Gillingham and its neighbourhoods, including:

Drying challenges in Gillingham homes

Solid brick terraces near the Dockyard and Brompton

Many terraces close to Brompton and the old Dockyard were built with solid brick walls and lime-based plaster rather than cavity construction. When a leak soaks these walls, moisture spreads sideways through the brickwork instead of staying contained, and lime plaster can hold dampness for weeks. Drying has to be gradual, as forcing heat too quickly can crack old plaster and push moisture into timber joists hidden behind skirtings.

Ex-council semis and concrete floors in Twydall and Hempstead

The 1950s and 60s semis common across Twydall and Hempstead were frequently built with solid concrete ground floors and cavity block walls. A burst pipe or washing machine leak here saturates the screed itself, not just the surface, and concrete holds water far longer than timber. Skirtings and stud partitions built off these floors need checking, since damp readily tracks upward into plasterboard walls.

Flat conversions and older housing stock towards the town centre

Around Gillingham town centre and Grange, older houses split into flats often have shared floor voids, timber subfloors and multiple layers of flooring added over the years. Water from an upstairs leak can sit trapped between joists and old boarding, unseen from either flat, encouraging mould growth in voids before any staining appears on ceilings below. Thorough moisture mapping is needed before drying equipment is positioned.

What our customers say

Excellent
Rated 5.0 / 5 based on 22 reviews on
Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Gillingham?

Call 020 3051 8478 or send us your details and we will agree a date with you. We dry and treat for homeowners, landlords and managing agents across Gillingham.

Frequently asked questions

How much does structural drying in Gillingham cost?
Drying equipment is hired by the week, with a one week minimum. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. Managed drying suits insurance claims and jobs where repair work depends on the property being proven dry.
How long does structural drying take in Gillingham?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the week with a one week minimum, for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.

More help in Gillingham

Damp, Mould and Water Damage Assessment

Find the real cause of damp, mould or a leak at your Gillingham property, with a written report and photographs. Assessment in Gillingham →

Leak detection

Trace a hidden water leak in Gillingham using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Gillingham →

Mould removal

Treat black mould in your Gillingham property and fix the moisture source behind it. Mould removal in Gillingham →

See what you get before you speak to us: read a real report from start to finish.