Speak to a Specialist
Speak to a Specialist
Feltham · TW13, TW14

Structural Drying & Dehumidifier Hire in Feltham

Fast, monitored structural drying across Feltham after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 5.0 from 22 Google reviews
Quick answer: Damp & Mould Solutions UK carries out structural drying and dehumidifier hire in Feltham after a leak or flood, measuring moisture until the structure is genuinely dry, not just dry to the touch. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. Drying equipment is hired by the week, with a one week minimum. Call 020 3051 8478.

Damp, mould & leak services in Feltham

Feltham's housing runs from 1930s semis and postwar council terraces around Feltham Hill to newer flat developments near the town centre and Browells Lane. Many properties sit on solid concrete or screeded floors close to the River Crane and Longford River, so escaped water tends to spread sideways under skirtings and pool in subfloor voids rather than draining away, delaying drying and raising the risk of trapped damp in walls.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp, Mould and Water Damage Assessment

One visit that tells rising damp, penetrating damp and condensation apart and finds what is feeding any mould, so the right repair is done once. About the Assessment →

Areas of Feltham we cover

We dry properties right across Feltham and its neighbourhoods, including:

Drying challenges in Feltham homes

Solid screed floors trapping water near the Crane

A lot of Feltham's postwar terraces and semis, particularly around Feltham Hill and Ashford Road, were built with solid concrete floors topped with sand cement screed. Once water gets underneath skirtings or through cracked screed joints, it becomes trapped against the slab with nowhere to evaporate to. Surface drying looks fine within days but moisture readings under the screed stay high for weeks without extraction and dehumidification.

Cavity walls and rendered elevations holding damp

Many 1930s to 1950s semis in Hanworth and East Bedfont have brick cavity walls with cement render finishes. When a burst pipe or roof leak saturates the cavity, wall ties and insulation batts hold water long after the plaster face feels dry to touch. Cement render also resists evaporation outward, so moisture pushes back into the room, showing up as mould and blown plaster weeks after the original leak was fixed.

Flat conversions and newer builds with sealed voids

Feltham town centre and areas near the station have seen conversions of older houses into flats plus newer apartment blocks with underfloor heating and sealed service voids. Leaks travelling between floors or into these enclosed cavities are hard to spot and even harder to dry, since ventilation is limited. Left unchecked, trapped moisture in ceiling voids and partition walls encourages mould growth that spreads between neighbouring units.

What our customers say

Excellent
Rated 5.0 / 5 based on 22 reviews on
Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Feltham?

Call 020 3051 8478 or send us your details and we will agree a date with you. We dry and treat for homeowners, landlords and managing agents across Feltham.

Frequently asked questions

How much does structural drying in Feltham cost?
Drying equipment is hired by the week, with a one week minimum. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. Managed drying suits insurance claims and jobs where repair work depends on the property being proven dry.
How long does structural drying take in Feltham?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the week with a one week minimum, for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.

More help in Feltham

Damp, Mould and Water Damage Assessment

Find the real cause of damp, mould or a leak at your Feltham property, with a written report and photographs. Assessment in Feltham →

Leak detection

Trace a hidden water leak in Feltham using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Feltham →

Mould removal

Treat black mould in your Feltham property and fix the moisture source behind it. Mould removal in Feltham →

See what you get before you speak to us: read a real report from start to finish.