Speak to a Specialist
Speak to a Specialist
Balham · SW12, SW17

Structural Drying & Dehumidifier Hire in Balham

Fast, monitored structural drying across Balham after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 4.9 from 17 Google reviews · trusted by Balham homeowners, landlords & property managers
Quick answer: After a leak or flood at a property in Balham, we dry the structure properly with monitored dehumidifiers and air movers, measuring moisture until it is genuinely dry, not just dry to the touch. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. We hire the drying equipment for the days or weeks it takes. Call 020 3051 8478.

Leak to dry to treated, one company in Balham

Balham's housing runs from long Victorian terraces off Bedford Hill and Ramsden Road to mansion blocks on Nightingale Lane and converted period houses split into flats near the High Road. Solid brick walls, lath and lime plaster, and stacked pipework mean leaks spread sideways and downwards, trapping moisture behind original fabric that dries slowly and unevenly.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp Investigation

Tell rising damp, penetrating damp and condensation apart, so the right repair is done once. Damp investigation →

Areas of Balham we cover

We dry properties right across Balham and its neighbourhoods, including:

Drying challenges in Balham homes

Solid brick walls and lime plaster in Victorian terraces

Many Balham terraces around Bedford Hill and Ramsden Road still have original solid brick walls finished in lime or early cement plaster. These materials absorb water readily after a burst pipe or roof leak, and moisture can migrate well beyond the visible stain. Surface drying looks complete long before the wall core has released trapped moisture, risking mould and blown plaster later.

Split conversions with shared floor and ceiling voids

Balham has large numbers of Victorian and Edwardian houses divided into upper and lower flats, common around Balham Hill and Clapham South. A leak in an upstairs bathroom often tracks through joist voids and lath ceilings into the flat below, soaking insulation and timber that stay hidden from sight. Drying needs coordination between both households and access to concealed voids, not just the visible ceiling stain.

Lower ground and basement flats with solid floors

Around Tooting Bec and the lower reaches of Balham Hill, converted basement and lower ground flats often have solid concrete floors laid over older screed, sometimes with limited damp-proofing. After flooding or a burst supply pipe, water tracks under skirting and into the screed itself, where it can sit for weeks. Left unchecked, this trapped moisture feeds mould growth along cold external walls.

What our customers say

★★★★★

Was lovely working with the team and they did a fantastic and quick job to get all the mould out of my bathroom. Very much looking forward to working with them on other projects around my house!! Thank you for everything and shout out to Karim for being so sweet!

Mariama, via Google

★★★★★

Omg what brilliant service, excellent the cleaner did a very good job was efficient he took his time and cleaned everything, highly recommend S. Bessim…

Susan Bessim, via Google

★★★★★

Amazing company! They responding very quickly. They have a low prices as well, not crazy quotes like from others. Job has been done very quickly and team was very professional. I will use them in the future if I needed. Thanks!

Patryk Gutowski, via Google

Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Balham?

Call 020 3051 8478 or arrange drying online. We dry and treat for homeowners, landlords and managing agents across Balham.

Frequently asked questions

How long does structural drying take in Balham?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the day or week for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.
Do you provide reports for insurance claims?
Yes. Drying comes with moisture logs and a written report formatted for insurers and managing agents.