Speak to a Specialist
Speak to a Specialist
Aldgate · E1, EC3

Structural Drying & Dehumidifier Hire in Aldgate

Fast, monitored structural drying across Aldgate after leaks and floods, drying walls, floors and voids to completion with hired dehumidifiers, then treating any mould.

★★★★★ 5.0 from 22 Google reviews
Quick answer: Damp & Mould Solutions UK carries out structural drying and dehumidifier hire in Aldgate after a leak or flood, measuring moisture until the structure is genuinely dry, not just dry to the touch. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. A leak is not over when the water stops. Mould can start within 48 hours, so we find the source, dry the structure and treat any mould, all with one company. Drying equipment is hired by the week, with a one week minimum. Call 020 3051 8478.

Damp, mould & leak services in Aldgate

Aldgate mixes converted Victorian warehouses with solid brick walls and timber floors, dense new-build towers such as Goodman's Fields with concrete screed and underfloor heating, and older Portsoken estate blocks. This range of construction ages and methods means a burst pipe or roof leak behaves very differently building to building, so drying has to be matched to the actual structure, not a generic routine.

Structural Drying

Dry walls, floors and voids after a leak or flood with monitored dehumidifiers, to completion. Structural drying →

Leak Detection

Trace hidden water leaks without unnecessary damage using thermal, acoustic and tracer-gas methods. Leak detection →

Mould Treatment

Treat and prevent the mould that follows water damage, dealing with the moisture source first. Mould treatment →

Damp, Mould and Water Damage Assessment

One visit that tells rising damp, penetrating damp and condensation apart and finds what is feeding any mould, so the right repair is done once. About the Assessment →

Areas of Aldgate we cover

We dry properties right across Aldgate and its neighbourhoods, including:

Drying challenges in Aldgate homes

Converted warehouse flats with solid brick and timber

Many Aldgate conversions retain original solid brick walls and exposed timber floor joists behind plasterboard linings. These absorb water slowly but hold onto it for weeks, and without a cavity to break the path, damp tracks sideways through the brickwork into neighbouring rooms and stairwells. Timber floors laid directly on old joists can cup, stain or start to smell musty if drying is left too shallow or stopped too early.

Screed floors and underfloor heating in new-build towers

Newer developments around Goodman's Fields and Aldgate Place typically use floating screed floors over concrete slabs, often with underfloor heating pipework embedded beneath. A bathroom or kitchen leak can spread under the floating layer and sit against the pipes and slab, invisible from above. Standard surface drying misses this trapped moisture, so screed readings and targeted extraction are needed to stop it resurfacing weeks later as damp patches or a warm, musty smell.

Below-ground plant rooms and basement flats

Aldgate's mix of commercial basements, plant rooms and lower ground floor flats near Portsoken and the old ward boundary sit below street level, where groundwater pressure and poor ventilation already push humidity higher than upper floors. A leak here saturates screed and wall bases with nowhere for moisture to escape naturally, and voids behind skirting or under raised flooring can turn mouldy within days if drying and dehumidification aren't sustained properly.

What our customers say

Excellent
Rated 5.0 / 5 based on 22 reviews on
Tip: Painting or plastering over a wall that is still wet inside traps the moisture and the mould comes back. Drying to a measured moisture target first means the repair lasts.

Need drying out in Aldgate?

Call 020 3051 8478 or send us your details and we will agree a date with you. We dry and treat for homeowners, landlords and managing agents across Aldgate.

Frequently asked questions

How much does structural drying in Aldgate cost?
Drying equipment is hired by the week, with a one week minimum. We deliver, install and collect commercial dehumidifiers and air movers, and we recommend one set per affected room. A weekly monitoring visit takes moisture readings so you can see the property drying. We confirm the price on a written quote once we understand the problem. Managed drying suits insurance claims and jobs where repair work depends on the property being proven dry.
How long does structural drying take in Aldgate?
Most domestic drying takes one to three weeks depending on how wet the structure is and the materials. We monitor moisture levels and confirm when it is genuinely dry.
Can I hire dehumidifiers from you?
Yes. We supply, install and monitor commercial dehumidifiers and air movers, hired by the week with a one week minimum, for as long as the drying takes.
Will you find the leak that caused it?
Yes. We can trace the source with non-destructive leak detection first, so you are not drying out a property that is still getting wet.

More help in Aldgate

Damp, Mould and Water Damage Assessment

Find the real cause of damp, mould or a leak at your Aldgate property, with a written report and photographs. Assessment in Aldgate →

Leak detection

Trace a hidden water leak in Aldgate using thermal, acoustic and tracer gas methods, with minimal damage. Leak detection in Aldgate →

Mould removal

Treat black mould in your Aldgate property and fix the moisture source behind it. Mould removal in Aldgate →

See what you get before you speak to us: read a real report from start to finish.